NOVATEC 56' Classic Sedan
Standard Specification
SPECIFICATIONS:
|
Length over all (LOA)
|
56' 8" (w/o bow pulpit)
|
|
Length L.W.L
|
50' 4"
|
|
Beam
|
16' 6"
|
|
Draft
|
3' 11
|
|
Hull Type
|
Semi Plane
|
|
Engines
|
Twin 540HP
|
|
Fuel Tank
|
825 Gal
|
|
Stainless Water Tank
|
250 Gal
|
|
Weight
|
59,400 lbs
|
Construction
- Hand laid FRP.
- Solid FRP hull below waterline.
- PVC foam on hull above waterline, decks, cabin top, and flybridge deck.
- Hull used Vinylester resin for first three layers.
- White exterior gel-coat.
- Longitudinal and transverse stringers throughout hull.
- Interior hull finished in gel-coat and white epoxy paint.
- Hull and deck joint thru-bolted and FRP bonded.
- Bottom barrier coat and anti-fouling paint.

Deck
- Molded non-skid decks.
- Integrated FRP swim platform.
- Stainless Steel handrails, 1-1/4".
- S.S. bow and stern staff.
- Electric anchor windlass with foot controls.
- S.S. CQR type anchor, 45Lbs with 100' anchor chain.
- FRP anchor platform with SS bow roller.
- S.S. over hard vinyl rub rail.
- Frameless flush mount windows (S.S. window frames optional).
- Safety glass windows.
- S.S. hatches over FWD cabin top.
- Dual trumpet air horn.
- S.S. port lights on the side of cabin top.
- International standard running lights.
- Hot and cold transom shower.
- Self draining decks.
- Fuel and water fill and waste discharge deck fittings.
- TV/Phone shore connections.
- 50amp 120/240volt power inlet.
- Side opening boarding gates.
- FRP radar arch.
- 316 S.S. handrails around deck.
- Forward fresh water deck wash outlet

Engineering
- Single or twin marine diesel engines with marine transmissions and flexible mounts.
- 13.5KW/60Hz genset with sound shield.
- Wet exhausts with marine mufflers.
- FRP engine room flooring.
- All batteries in vented FRP boxes.
- Engine room sound insulation.
- Hydraulic steering system.
- Morse engine controls with heavy duty cables.
- Engine room vents.
- Engine room blowers x 2.
- Bronze thru-hull fittings.
- Seacocks on all thru-hull fittings below the waterline.
- Seastrainers on all machinery intakes and A/C intakes.
- Aluminum or FRP Molded fuel tanks, primed, and epoxy coated, 825 gals total.
- S.S. propeller shaft(s), brand Aquamet #17.
- 4 bladed propellers.
- S.S. strut(s).
- S.S. plate rudders.
- Single Racor filter for engines and genset.
- Engine room lighting 12v.
- S.S. freshwater tank, 250 gals.
- FRP holding tank, 60 gals.
- Fresh water outlet in engine room.
- Full engine instrumentation at helms (F/B and lower salon station).
- Copper tubing for fuel, and steering systems.
- Electric bilge pumps, automatic x 3.
- Manual bilge pump.
- Trim tabs.
- Marine air conditioning: 9K x 1, 9K x 1, 16K x 1
- Dripless shaft seals (Taiwan made). If choose "Tides Marines" dripless shaft seals will be optional item.
- Fuel management system.
Plumbing and Electrical
- Color coded and labeled wiring system.
- Custom AC distribution panel with meters.
- Custom DC distribution panel with meters.
- Battery selector switch.
- Battery cut-off switched.
- Circuit breaker on all circuits.
- AC outlets throughout boat.
- Switches for interior and exterior lighting.
- Battery Charger
- Shore power 50 amp/generator selector switch.
- Bonding system with zinc plate on transom.
- GFI protected outlets at galley, heads, and exterior.
- Tank level gauges.
- Prewire for stereo and speakers.
- Prewire for cable TV.
- 12V outlet at helms.
- 12V lighting for interior and exterior.
- 12V pressure water pump, 4.5 gpm.
- 12 gallon hot water heater with engine exchanger.
- Par Quiet-Flush electric heads x 2.
- PVC marine sanitation hose on toilet system.
- Macerator pump for overboard discharge.
- Electric wash down pump.
- Shower sump pump.
- Sight gauges on fuel and water tanks.

Flybridge
- Molded FRP helm station.
- Pedestal helm seat x 1
- S.S. Steering wheel.
- Full engine instrumentation.
- Morse engine controls.
- Space for electronic installations.
- Bilge pump monitor lights.
- S.S. safety grab rail.
- Tinted venturi with S.S. frame.
- FRP radar arch.
- Bench seats with storage beneath.
- Vinyl cushions.
- Molded non-skid deck.

Master Stateroom
- Berth with 5" foam mattress.
- Upholstery.
- Teak hanging locker with 12V lighting.
- Recessed lighting.
- Storage cabinets on both sides.
- Dressing mirror.
- Reading lights x 2.
- Vinyl headliner.
- S.S. port hole
- Draperies.
- Lockable teak privacy door.
- Teak joinery.
- Teak and holly sole.
- AC outlets.

Forward Cabin
- Berth with 5" foam mattress.
- Upholstery.
- Teak hanging lockers with 12V lighting.
- Teak bedside cabinets with drawer and cabinet door.
- Recessed lighting.
- Storage cabinets on both sides.
- Dressing mirror.
- Reading lights x 2.
- Vinyl headliner.
- S.S. hatch.
- Draperies.
- Lockable teak privacy door.
- Teak joinery.
- Teak and holly sole.
- AC outlets

Salon
-Aluminum sliding door.
-Entertainment center
-Cabinet for Pop-up TV lift
-L-shape settee
-Teak table

Galley
-Granite or Corian countertop
-Seaward three burner electric range
-S/S sink with faucet
-Hanging cabinet
-Cabinets and drawers for storage
-L-shape dinette and table or Optional Lower Helm Station
Remarks:
Manufacture reserves the right to change and modify specs without notice.
Optional items are available.
Custom cabinets and modifications quoted upon request.