NOVATEC 48' Islander
Standard Specification
SPECIFICATIONS:
|
Length over all (LOA)
|
48'02"
|
|
Length L.W.L
|
41'
|
|
Beam
|
15'
|
|
Draft
|
3"10"
|
|
Hull Type
|
Semi Displacement
|
|
Engines
|
Twin 380HP ~ 540HP
|
|
Aluminum Fuel Tank
|
400 Gal
|
|
Stainless Water Tank
|
200 Gal
|
|
Weight
|
48,000 lbs
|
Construction
- Hand laid FRP.
- Solid FRP below waterline.
- PVC foam on hull sides, decks, cabin top, and sundeck hardtop.
- Hull used Vinylester resin for first three layers.
- White exterior gel-coat.
- Longitudinal and transverse stringers throughout hull.
- Interior hull finished in gel-coat and white epoxy paint.
- Hull and deck joint thru-bolted and FRP bonded.
- Bottom barrier coat and anti-fouling paint.
Deck
- Molded non-skid decks.
- FRP swim platform.
- Stainless Steel handrails, 1-1/4".
- S.S. bow and stern staff.
- Electric anchor windlass with foot controls.
- S.S. CQR type anchor, 45Lbs with 100' anchor chain.
- FRP anchor platform with SS bow roller.
- S.S. cleats x6 with fairleads.
- S.S. over hard vinyl rub rail.
- Aluminum window frames or frameless
- Safety glass windows.
- S.S. hatches.
- Dual trumpet air horn.
- S.S. port windows.
- International standard running lights.
- Hot and cold transom shower.
- Fresh water outlet at forward deck for deck wash
- Self draining decks.
- Fuel and water fill and waste discharge deck fittings.
- TV/Phone inlet.
- 50amp 120/240volt power inlet.
- Hard top over sundeck.
- Dodger panel around sundeck with opening door to access swim platform.
- Wing doors port and starboard.
- Side opening boarding gates.
- FRP radar arch.
- S.S. hand rails on sides of FB, transom and on hardtop.
Engineering
- Single or twin diesel engines W/transmissions.
- 9KW genset with sound shield.
- Wet exhausts with marine mufflers.
- FRP engine room flooring.
- All batteries in vented FRP boxes.
- HD batteries: 5 pieces: 2 x 200amp for engines, 2x 200amp for house, 1x 100amp for Gen. set.
- Engine room sound insulation.
- Hydraulic steering system.
- Morse engine controls with heavy duty cables.
- Engine room vents.
- Engine room blowers x 2.
- Bronze thru-hull fittings.
- Seacocks on all thru-hull fittings below the waterline.
- Seastrainers on all machinery intakes and A/C intakes.
- S.S fuel tanks, primed, & epoxy coated, 200gals/ea. x 2.
- S.S. 2" propeller shaft(s), brand Aquatech #17.
- 4 bladed nickel aluminum bronze propellers.
- S.S. strut(s).
- S.S. plate rudders.
- Single racor filter for each engines and filter for genset.
- Engine room lighting 12v.
- S.S. freshwater tank, 200 gals.
- FRP holding tank, 40 gals.
- Fresh water outlet in engine room.
- Full engine instrumentation at helms, F/B and lower salon station (Layout B only)
- Full engine instrumentation at F/B (Layout A and C only)
- Copper tubing for fuel, and steering systems.
- Electric bilge pumps, automatic x3.
- Manual bilge pump.
- Trim tabs.
- Marine air conditioning, Total 32K BTU
- Dripless shaft seals (Taiwan made). If choose "Tides Marines" dripless shaft seals will be optional item.
- Fuel management system.
Plumbing and Electrical
- Color coded and labeled wiring system.
- Custom AC distribution panel with meters.
- Custom DC distribution panel with meters.
- Battery cut-off switched.
- Circuit breaker on all circuits.
- AC outlets throughout boat.
- Switches for interior and exterior lighting.
- 50 amp multibank battery charger.
- Shore power 50 amp/generator selector switch.
- Bonding system with zinc plate on transom.
- Air horn.
- GFI protected outlets at galley, heads, and exterior.
- Tank level gauges.
- Prewire for stereo and speakers.
- Prewire for cable TV.
- 12V outlet at helms.
- 12V lighting for interior and exterior.
- 12V pressure water pump, 4.5 gpm.
- 12 gallon hot water heater with engine exchanger.
- Jabsco electric heads x2.
- PVC marine sanitation hose on toilet system.
- Macerator pump for overboard discharge.
- Shower sump pumps x2.
- Sight gauges on fuel and water tanks.
Flybridge
- Molded FRP helm station.
- Pedestal helm seal
- S.S. Steering wheel.
- Full engine instrumentation.
- Morse engine controls.
- Space for electronic installations.
- Bilge pump monitor lights.
- S.S. safety grab rail.
- Tinted venturi with S.S. frame.
- FRP radar arch.
- Bench seats with storage beneath.
- Vinyl cushions.
- Molded non-skid deck.
Sundeck
- Molded FRP hard top with S.S. and FRP supports.
- FRP dodger panel with opening door.
- Boarding door with ladder to swim platform.
- Molded FRP non-skid deck.
- Wing doors with locking door handles.
- Wet bar with sink and hot and cold water and AC outlet, GFI protected.
- Molded FRP steps to F/B.
- Full size entry door to salon with lock.
Master Stateroom
Tell a Friend
